Monday, February 13, 2012

Heinkel Tourist

The Heinkel Tourist is a motor scooter made by Heinkel Flugzeugwerke from 1953 to 1965. More than 100,000 were manufactured and sold.

The Tourist was sold as an upscale scooter. It was more expensive than a Vespa or a Lambretta, and was generally heavier, more comfortable, and more stable. It was available with a speedometer, a steering lock, a clock, a luggage carrier, and a spare wheel. It was referred to in England as "The Rolls-Royce of Scooters" and was advertised by a dealer in Massachusetts as "The Cadillac of Scooters".

The Tourist had a tubular steel frame to which pressed steel body panels were mounted. The engine of the Tourist was mounted in the frame and drove the rear wheel by a chain enclosed in the swingarm. Thus sheltered, the chain ran in a sealed oil-bath, extending its life and preventing any oil from contacting either scooter or rider. The engines used in Heinkel Tourists were 4-stroke while most other scooters of the time, including the Heinkel 150 light scooter from the 1960s, had 2-stroke engines.

Production

Heinkel's first prototype scooter was built in 1949. Production of the Tourist began in 1953.

The Tourist was manufactured in five series: the 101 A0 (1953–1954), the 102 A1 (1954–1955), the 103 A0 (1955–1957), the 103 A1 (1957–1960), and the 103 A2 (1960–1965).

101 A0

The Tourist 101 A0 was the first series of Heinkel Tourist, the only series with a 149 cc (9.1 cu in) engine, and the only series with a kick starter. Production began in April 1953. The three-speed transmission was actuated by a twistgrip on a tubular steel handlebar.

In June 1954, the electrics were uprated from 6 V to 12 V to accommodate the addition of an electric starter at that time. Production of the 101 A0 ended two months later. 6,500 Tourist 101 A0s were built.

102 A1

Production of the 102 A1 series began in July 1954. The main changes from the 101 A0 were the larger engine, which had been bored and stroked to a capacity of 174 cc (10.6 cu in), the absence of a kick starter, and the use of the 12 V electrics and an electric starter as on the last of the 101 A0s. A glove box was included behind the legshield. The speedometer was mounted on the glove box.

17,500 Tourist 102 A1s were built before production ended in August 1955.


103 A0

Production of the 103 A0 series began in August 1955. 103-series Tourists had four speed transmissions and ten inch wheels, enlarged from the three speed transmissions and eight inch wheels of earlier models. The result was a larger, heavier, and thirstier scooter on one hand, and a faster, more sophisticated scooter on the other.

It is stated that 34,060 Tourist 103 A0s were built before production ended in September 1957, but this production figure is disputed.


103 A1

Production of the 103 A1 series began in September 1957. The tubular handlebars of previous series were replaced by a cast handlebar containing an instrument panel. The engine, while remaining the same in size, was improved by the use of a two-bearing crankshaft. The engine was now mounted to the frame with rubber mounts, improving the ride.

50,050 Tourist 103 A1s were built before production ended in June 1960.


103 A2

Production of the final series of Heinkel Tourist, the 103 A2, began in August 1960. The telescopic forks of the previous series were replaced by a single-sided trailing-link fork. The rear body panel was restyled and was not interchangeable with those of earlier series.

55,000 Tourist 103 A2s were built before production of the Heinkel Tourist ended on 31 December 1965.

Specifications


Series Years built Engine capacity (cc) Bore × stroke (mm) Wheelbase (mm) Length (mm) Width (mm) Height (mm) Kerb weight (kg) Wheels
101 A0 1953 – 1954 149 59.0 × 54.5 1330 1980 710 980 129 4.00 × 8"
102 A1 1954 – 1955 174 60.0 × 61.5 133
103 A0 1955 – 1957 1370 2060 1000 152 4.00 × 10"
103 A1 1957 – 1960 1375 2085 156
103 A2 1960 – 1965 1380 2020 148


Export

United Kingdom

The Coventry-based Excelsior motorcycle manufacturer began importing HeinkelTourist scooters into the United Kingdom in late 1955. In late 1956, Nobel Motors of Picadilly became the new official importer of Heinkel scooters and bubble cars.

By the end of 1957, the UK importer of Heinkel scooters was International Sales of Dublin. This may have been part of a deal by which an Irish engineering company to build the Heinkel Kabine bubble car under licence.

Importation of the 103 A2 began in February 1962 by Hans Motors of London, which had an all-German staff. Trojan Cars Ltd., the manufacturers of the Kabine under licence at the time, was already selling Lambretta scooters and did not accept the offer to import Heinkel Tourists.

United States

Heinkel Tourists were imported into the United States by a succession of authorized distributors:
  • Nobel Motors of London, England, 1956-57 Nobel Motors did not import any motorcycles or bubble cars into North America.
  • East Land Motors of Brooklyn, New York, 1957
  • International Scooters Corporation of Long Island City, New York, 1959-63 . Their contracted sub-distributors were:
    • Schleichler Motors of Oakland, California, for the West Coast
    • Triangle Motorcycles of Chicago, Illinois, for the Midwest
  • Scooterama of San Francisco, California, 1963–64
  • Schleichler Motors of Oakland, California, 1964–65
Approximately 350 Heinkel Tourists were sold in the United States.

3 comments:

Bola Ria said...

Apike Pollllllllllll.........

Bola Ria said...

Apike Pooolllllll....

Croose Hackle said...

Above all else, Scooterpartsco.com is controlled by fans. We are dynamic Scooterists who ride practically consistently. Scooterpartsco.com began once again a Vespa Starter Motor. We run an extremely bustling bike repair shop and when the nearby Vespa merchant pressed it in, we began getting the greater part of the Vespa administration. The first occasion when we valued out a starter for an ET4, and after that acknowledged it is the same part that was utilized on a great deal of Japanese bicycles and is about a large portion of the cost from them, we chose to make sense of why Vespa parts are so costly in the US.
We give alternatives in vespa parts, malossi parts, malossi vespa parts, honda forza, honda pcx, yamaha smax, yamaha superbness, suzuki burgman and execution bike parts.

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | Blogger Templates