Stella Scooters

Stella (known by different names in different countries) is a model of a vintage-style scooter imported into the United States by Chicago-based Genuine Scooters since 2003, and manufactured by LML in Kanpur, India.

History

In 1986, LML began a joint venture with scooter manufacturer Piaggio, through which the Italian company sold its Vespa PX model to the Indian market. The Stella and Vespa P-series scooters share much of their design and engineering, and many of their parts are interchangeable. Genuine Scooters was formed to import the scooter to the United States market. Production was interrupted by a labor strike from 2005 to mid-2006 but resumed once the dispute was settled.

Characteristics

The Stella features a 150cc 2-stroke engine capable of speeds up to 65mph. Like "vintage" European scooters, it operates with a 4-speed "twist-grip" manual transmission. Other traditional features include a steel frame, spare tire, and styling.

The 2007 and 2008 models include better quality paint, grips, and a redesigned headlight.

The 2-stroke version of the scooter is authorized through Genuine Scooters dealers throughout most of the United States, but not in California due to state regulations. In 2011 Genuine developed a 4-stroke version of the Stella which meets California emission standards.

Comparison of Stella and Vespa PX150

Comparison
Feature	Genuine Stella	Vespa PX150
Frame	Heavy-Guage Pressed Steel Monocoque	Pressed Steel Monocoque
Engine Type	5-Port Single Cylinder 2-Stroke	Single Cylinder 2-Stroke
Displacement	150cc	151cc
Bore * Stroke	57.8 mm * 57 mm	58 mm * 57 mm
Fuel Economy	90 Miles Per Gallon	60 Miles Per Gallon
Compression Ratio	9:1	8:1
Induction	Modern Reed Valve	Rotary Valve (used since '50's)
Ignition	Electronic CDI	Electronic CDI
Starter	Electric and Kick	Electric and Kick
Exhaust	Catalyzed	Catalyzed
Lubrication	Automatic Oil Injection	Automatic Oil Injection
Cooling	Forced Air	Forced Air
Transmission	4-Speed Constant Mesh	4-Speed Constant Mesh
Fuel Capacity	2.1 Gallons	2.1 Gallons
Horsepower (Max.)	10	8.2
Dry Weight	240 lbs. Due to thicker steel body	213 lbs.
Length/Width	1760 mm./ 695 mm.	1810 mm./ 740 mm.
Wheelbase	1235 mm.	1260 mm.
Seat Height	820 mm.	810 mm.
Wheels/Tires	Pressed Steel Rim/ 3.50*10 Tube Type	Pressed Steel Rim/ 3.50*10 Tube Type
Rear Brake	Mechanical Drum	Mechanical Drum
Front Brake	7.87" Hydraulic Disc	7.87" Hydraulic Disc
Suspension	Adjustable Load Gas Shocks	Coil Over Oil Shocks (Used since 50's)
Colors	Red, Tangerine, Green, Silver, + Special editions	"Vintage" Green
Price (MSRP)	$2895	$4299

Read more »

Stella 4 strokes

Stella, our first love. She is now thoroughly clean and natural, and the only REAL contemporary traditional motorcycle in The united states that's not just another duplicate of a traditional style from Italia. Her reputation is genuine German, her appeal unique. Her natural personality and tightfisted gas intake are the product of the most realistic and ahead thinking designers in Indian. She still changes like a activities car, but the website is silent and the the vibrations are gone. In a wide range of satisfied colours, she presents an EPA town score of 140 mpg. Outfit her up; she's ready to go wherever you go. You can sleep a hand crafted, all-steel sidecar in corresponding colours if you want to be the hottest person on your prevent.

Specification

Stella 4-Stroke Specs
Engine	147.55cc 4-Stroke, Air Cooled
Transmission	4-speed manual with "twist grip" shifting
Colors	Avocado, Creme, Slate Blue, White, Dijon Yellow, Red
Suspension	Gabriel® performance shocks
Tire Size	3.5" x 10" Interchangable
Braking	Front Grimeca Hydraulic Disc, 6" Rear Drum
Top Speed	60+ mph
MPG	140* *EPA city estimate.
Warranty	2-Year / Unlimited-mile

Read more »

Stella 2 strokes

Even More Unique out of the Box!!! This year's Stella in all of its 2-stroke, 150cc wonder. 2009 is the last formal generation season of the Stella 2-stroke. The last ones are available right NOW in very restricted volumes at your regional Legitimate supplier. Once they are gone they are gone! Don't pass up out on having one of Many most collectible child scooters. Available in Red, Tangerine, Grape,Black, and Dust Pink (not all colours are available in all areas).








Specification

Engine	5-port 2-stroke
Transmission	4-speed manual with "twist grip" shifting
Colors	Black, Red, Light Blue, Avocado, Orange
Suspension	Gabriel® performance shocks
Tire Size	3.5" x 10" Interchangable
Braking	Front Grimeca Hydraulic Disc, 6" Rear Drum
Top Speed	60+ mph
MPG	90 mpg plus* *Depending on road conditions, riders weight and altitude.
Warranty	1-Year / 5000 Mile

Read more »

Heinkel Tourist

The Heinkel Tourist is a motor scooter made by Heinkel Flugzeugwerke from 1953 to 1965. More than 100,000 were manufactured and sold.

The Tourist was sold as an upscale scooter. It was more expensive than a Vespa or a Lambretta, and was generally heavier, more comfortable, and more stable. It was available with a speedometer, a steering lock, a clock, a luggage carrier, and a spare wheel. It was referred to in England as "The Rolls-Royce of Scooters" and was advertised by a dealer in Massachusetts as "The Cadillac of Scooters".

The Tourist had a tubular steel frame to which pressed steel body panels were mounted. The engine of the Tourist was mounted in the frame and drove the rear wheel by a chain enclosed in the swingarm. Thus sheltered, the chain ran in a sealed oil-bath, extending its life and preventing any oil from contacting either scooter or rider. The engines used in Heinkel Tourists were 4-stroke while most other scooters of the time, including the Heinkel 150 light scooter from the 1960s, had 2-stroke engines.

Production

Heinkel's first prototype scooter was built in 1949. Production of the Tourist began in 1953.

The Tourist was manufactured in five series: the 101 A0 (1953–1954), the 102 A1 (1954–1955), the 103 A0 (1955–1957), the 103 A1 (1957–1960), and the 103 A2 (1960–1965).

101 A0

The Tourist 101 A0 was the first series of Heinkel Tourist, the only series with a 149 cc (9.1 cu in) engine, and the only series with a kick starter. Production began in April 1953. The three-speed transmission was actuated by a twistgrip on a tubular steel handlebar.

In June 1954, the electrics were uprated from 6 V to 12 V to accommodate the addition of an electric starter at that time. Production of the 101 A0 ended two months later. 6,500 Tourist 101 A0s were built.

102 A1

Production of the 102 A1 series began in July 1954. The main changes from the 101 A0 were the larger engine, which had been bored and stroked to a capacity of 174 cc (10.6 cu in), the absence of a kick starter, and the use of the 12 V electrics and an electric starter as on the last of the 101 A0s. A glove box was included behind the legshield. The speedometer was mounted on the glove box.

17,500 Tourist 102 A1s were built before production ended in August 1955.

103 A0

Production of the 103 A0 series began in August 1955. 103-series Tourists had four speed transmissions and ten inch wheels, enlarged from the three speed transmissions and eight inch wheels of earlier models. The result was a larger, heavier, and thirstier scooter on one hand, and a faster, more sophisticated scooter on the other.

It is stated that 34,060 Tourist 103 A0s were built before production ended in September 1957, but this production figure is disputed.

103 A1

Production of the 103 A1 series began in September 1957. The tubular handlebars of previous series were replaced by a cast handlebar containing an instrument panel. The engine, while remaining the same in size, was improved by the use of a two-bearing crankshaft. The engine was now mounted to the frame with rubber mounts, improving the ride.

50,050 Tourist 103 A1s were built before production ended in June 1960.

103 A2

Production of the final series of Heinkel Tourist, the 103 A2, began in August 1960. The telescopic forks of the previous series were replaced by a single-sided trailing-link fork. The rear body panel was restyled and was not interchangeable with those of earlier series.

55,000 Tourist 103 A2s were built before production of the Heinkel Tourist ended on 31 December 1965.

Specifications

Series	Years built	Engine capacity (cc)	Bore × stroke (mm)	Wheelbase (mm)	Length (mm)	Width (mm)	Height (mm)	Kerb weight (kg)	Wheels
101 A0	1953 – 1954	149	59.0 × 54.5	1330	1980	710	980	129	4.00 × 8"
102 A1	1954 – 1955	174	60.0 × 61.5					133
103 A0	1955 – 1957			1370	2060		1000	152	4.00 × 10"
103 A1	1957 – 1960			1375	2085			156
103 A2	1960 – 1965			1380	2020			148

Export

United Kingdom

The Coventry-based Excelsior motorcycle manufacturer began importing HeinkelTourist scooters into the United Kingdom in late 1955. In late 1956, Nobel Motors of Picadilly became the new official importer of Heinkel scooters and bubble cars.

By the end of 1957, the UK importer of Heinkel scooters was International Sales of Dublin. This may have been part of a deal by which an Irish engineering company to build the Heinkel Kabine bubble car under licence.

Importation of the 103 A2 began in February 1962 by Hans Motors of London, which had an all-German staff. Trojan Cars Ltd., the manufacturers of the Kabine under licence at the time, was already selling Lambretta scooters and did not accept the offer to import Heinkel Tourists.

United States

Heinkel Tourists were imported into the United States by a succession of authorized distributors:

• Nobel Motors of London, England, 1956-57 Nobel Motors did not import any motorcycles or bubble cars into North America.
• East Land Motors of Brooklyn, New York, 1957
• International Scooters Corporation of Long Island City, New York, 1959-63 . Their contracted sub-distributors were:
  • Schleichler Motors of Oakland, California, for the West Coast
  • Triangle Motorcycles of Chicago, Illinois, for the Midwest
• Scooterama of San Francisco, California, 1963–64
• Schleichler Motors of Oakland, California, 1964–65

Approximately 350 Heinkel Tourists were sold in the United States.

Read more »